Specific to Premiere Elements version 14
by John Walker » Mon Aug 07, 2017 5:53 am
New camera (Panasonic HC-X920) and I've recorded a project at 1080/50p. I've loaded a couple of clips in PE14 ad it appears to handle it ok. I seem to recall reading something about that setting being only suitable for Blueray.
Am I ok with this setting for making the ISO file for DVD and do I need to do anything in setting up the project in PE14?
Thanks John
[1] Sony RX100 M6 (PAL) [2] Panasonic HC-X920 (PAL) Software: Elements 2018 Sonicfire Pro 6.0 Intel i5 3.5 Ghz Gigabyte Z97X-UD3H C: 500Gb SSD, 2 x 1Tb internal SATA drives, 3 x 2Tb Back Up Drives 16 Gb Ram Radeon Pro WX3100 Based in Canterbury, UK
-
John Walker
- Frequent Contributor
-
- Posts: 159
- Joined: Tue Oct 06, 2015 1:38 pm
by Steve Grisetti » Mon Aug 07, 2017 6:54 am
As I understand it, there is no 50p standard definition DVD format. So you won't be able to play it on a DVD player.
But maybe someone with more knowledge in this area will give us more details.
HP Envy with 2.9/4.4 ghz i7-10700 and 16 gig of RAM running Windows 11 Pro
-
Steve Grisetti
- Super Moderator
-
- Posts: 14447
- Joined: Sat Feb 17, 2007 5:11 pm
- Location: Milwaukee, Wisconsin
by John Walker » Mon Aug 07, 2017 8:41 am
Thanks Steve,
Out of interest, I've just imported the clips into PE14 and made a quick trial project. It saved as an ISO ok with a frame rate of 25fps. Burnt the ISO onto DVD and it plays fine fortunately and the quality is very good.
I realise this isn't the quality that it was recorded at but at least the footage will be usable.
Should I set the camera to 50i for future recordings as I don't plan to work with Blueray? (very few of the people that I produce the DVD's for have Blueray players)
John
[1] Sony RX100 M6 (PAL) [2] Panasonic HC-X920 (PAL) Software: Elements 2018 Sonicfire Pro 6.0 Intel i5 3.5 Ghz Gigabyte Z97X-UD3H C: 500Gb SSD, 2 x 1Tb internal SATA drives, 3 x 2Tb Back Up Drives 16 Gb Ram Radeon Pro WX3100 Based in Canterbury, UK
-
John Walker
- Frequent Contributor
-
- Posts: 159
- Joined: Tue Oct 06, 2015 1:38 pm
by Steve Grisetti » Mon Aug 07, 2017 11:19 am
There's no harm in shooting at a higher frame rate, so it's up to you.
HP Envy with 2.9/4.4 ghz i7-10700 and 16 gig of RAM running Windows 11 Pro
-
Steve Grisetti
- Super Moderator
-
- Posts: 14447
- Joined: Sat Feb 17, 2007 5:11 pm
- Location: Milwaukee, Wisconsin
by Chuck Engels » Mon Aug 07, 2017 3:38 pm
Premiere Elements will basically down convert the original to DVD specs during the burning process, shouldn't be a problem.
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory. 2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
by John Walker » Mon Aug 07, 2017 4:36 pm
Steve and Chuck,
Thanks for your confirmations that it's ok to shoot at the higher rates and that Elements has no problem with that. I might be glad of the higher quality later.
Regards
John
[1] Sony RX100 M6 (PAL) [2] Panasonic HC-X920 (PAL) Software: Elements 2018 Sonicfire Pro 6.0 Intel i5 3.5 Ghz Gigabyte Z97X-UD3H C: 500Gb SSD, 2 x 1Tb internal SATA drives, 3 x 2Tb Back Up Drives 16 Gb Ram Radeon Pro WX3100 Based in Canterbury, UK
-
John Walker
- Frequent Contributor
-
- Posts: 159
- Joined: Tue Oct 06, 2015 1:38 pm
by John 'twosheds' McDonald » Tue Aug 08, 2017 12:57 am
John, you have mentioned 50p and 25p. Are you in PAL land rather than NTSC land? Just useful to know.
AMD Ryzen 3900x 12C/24T, ASUS x570 mobo, Arctic Liquid Freezer ll 280, Win11 64 bit, 64GB RAM, Radeon RX 570 graphics, Samsung 500GB NVMe 980 PRO (C:), Samsung 970 Evo SSD (D:), Dell U2717D Monitor, Synology DS412+ 8TB NAS, Adobe CS6.
-
John 'twosheds' McDonald
- Moderator
-
- Posts: 4238
- Joined: Mon Feb 19, 2007 11:57 am
- Location: Cheshire, UK
by sidd finch » Tue Aug 08, 2017 10:16 am
Should I set the camera to 50i for future recordings
I would not record in 50i mode. I would recommend that you record in 50p mode, because the picture appears much smoother and more like a film. Even though your final output will be in 25p you should notice a much more clearer picture than if you recorded in 25p Sidd
"Life moves pretty fast. If you don't stop and look around once in a while, you could miss it." ..... Ferris Bueller
-
sidd finch
- Moderator
-
- Posts: 6542
- Joined: Mon Apr 23, 2007 5:20 pm
- Location: Cyberspace
by John Walker » Tue Aug 08, 2017 5:06 pm
John 'twosheds' McDonald wrote:John, you have mentioned 50p and 25p. Are you in PAL land rather than NTSC land? Just useful to know.
Hi John Yes, in PAL land. Cheers John
[1] Sony RX100 M6 (PAL) [2] Panasonic HC-X920 (PAL) Software: Elements 2018 Sonicfire Pro 6.0 Intel i5 3.5 Ghz Gigabyte Z97X-UD3H C: 500Gb SSD, 2 x 1Tb internal SATA drives, 3 x 2Tb Back Up Drives 16 Gb Ram Radeon Pro WX3100 Based in Canterbury, UK
-
John Walker
- Frequent Contributor
-
- Posts: 159
- Joined: Tue Oct 06, 2015 1:38 pm
by John Walker » Tue Aug 08, 2017 5:08 pm
sidd finch wrote:Should I set the camera to 50i for future recordings
I would not record in 50i mode. I would recommend that you record in 50p mode, because the picture appears much smoother and more like a film. Even though your final output will be in 25p you should notice a much more clearer picture than if you recorded in 25p Sidd
Thanks for your confirmation Sidd - much appreciated. John
[1] Sony RX100 M6 (PAL) [2] Panasonic HC-X920 (PAL) Software: Elements 2018 Sonicfire Pro 6.0 Intel i5 3.5 Ghz Gigabyte Z97X-UD3H C: 500Gb SSD, 2 x 1Tb internal SATA drives, 3 x 2Tb Back Up Drives 16 Gb Ram Radeon Pro WX3100 Based in Canterbury, UK
-
John Walker
- Frequent Contributor
-
- Posts: 159
- Joined: Tue Oct 06, 2015 1:38 pm
Return to PRE Version 14
Similar topics
Who is online
Users browsing this forum: No registered users and 3 guests
|