|
Audio Output to 5.1
6 posts
• Page 1 of 1
Audio Output to 5.1I use .m2ts video files for my editing and noticed that when I change the presets to output 5.1 channels I get "The source and output audio channels are not compatible or a conversion does not exist". Appreciate any help you could throw my way.
Studio XPS 9100 Intel Core i7-960 processor(8MB L2 Cache, 3.20GHz), 12GB DDR3 SDRAM,1333MHZ, 6x2GB, AMD Radeon HD 6670 1GB DDR5, 2TB Serial ATA 2 Hard Drive 7200 RPM, Windows 7 Professional 64 bit, LG Blu-Ray Recorder BH12LS35
Re: Audio Output to 5.1What are the specs of your video, Doc? Are you shooting video with 5.1 audio?
And when you say you "change the presets to output 5.1 channels", what exactly are you doing and when do you see this message? HP Envy with 2.9/4.4 ghz i7-10700 and 16 gig of RAM running Windows 11 Pro
Re: Audio Output to 5.1The video is recorded at 5.1 audio (using Sony HDR-PJ10). When I go to Publish & Share
Computer AVCHD Choose preset MP4 - H264 1440x1080p 30 Advanced Audio Tab Change output to 5.1 Channels which changes the audio quality to high I leave the codec at AAC and leave the Frequency at 48kHz I change the bitrate settings to 256 to match my clips Save it as a new preset name and try to save It's at this point where I get the message Studio XPS 9100 Intel Core i7-960 processor(8MB L2 Cache, 3.20GHz), 12GB DDR3 SDRAM,1333MHZ, 6x2GB, AMD Radeon HD 6670 1GB DDR5, 2TB Serial ATA 2 Hard Drive 7200 RPM, Windows 7 Professional 64 bit, LG Blu-Ray Recorder BH12LS35
Re: Audio Output to 5.1It's possible that the program is not recognizing your video as 5.1 audio when it automatically sets your project settings.
Start a new project. On the New Project panel, select Settings, then select the project preset for AVCHD/Full HD 5.1 audio. Add a sample of your video to it and then try your 5.1 output and see if that makes a difference. EDIT Did a test run of my own and got the same results! I wonder if the program isn't capable of outputting a 5.1 H264 file. In fact, I've not been able to output 5.1 in any format. Maybe someone with more experience with 5.1 audio will have some suggestions. HP Envy with 2.9/4.4 ghz i7-10700 and 16 gig of RAM running Windows 11 Pro
Re: Audio Output to 5.1VAGUE RECOLLECTIONS!
Age is catching up on me, I confess, but I do have a vague recollection that the 5.1 Dolby audio facility had a limited number of uses (max 5?) in PPro before it ceased working and then one then had to stump up the moolah for a licence. Same with PrEl? AMD Ryzen 3900x 12C/24T, ASUS x570 mobo, Arctic Liquid Freezer ll 280, Win11 64 bit, 64GB RAM, Radeon RX 570 graphics, Samsung 500GB NVMe 980 PRO (C:), Samsung 970 Evo SSD (D:), Dell U2717D Monitor, Synology DS412+ 8TB NAS, Adobe CS6.
Re: Audio Output to 5.1I don't know, John. I've never seen any indication to that effect.
I think Adobe just snuck out the 5.1 output feature. I mean, you can set it for 5.1 output in the advanced settings -- but when you do, you get an output error, as Doc says. HP Envy with 2.9/4.4 ghz i7-10700 and 16 gig of RAM running Windows 11 Pro
6 posts
• Page 1 of 1
Similar topicsWho is onlineUsers browsing this forum: No registered users and 2 guests |