|
rendering
6 posts
• Page 1 of 1
renderingJust finished editing a project at 1 hour 10 minutes in length. After I render, playing the project is just fine. When I finish my session I save and close to return at a later time. When I do the project opens as an un-rendered project. Shouldn't the project stay rendered? In addition, when I first upload all my footage to PRE and then started to build the timeline, a widow appeared relating to stabilization of the clip. I said yes and moved on. I assumed PRE noticed something in those clips. Smoothing was what I said okay to. Those clips always needed to be re-rendered. So within stabilization I selected correction. Rendered the project and had all green. As above, when I returned to the project those clips all transitions were in the red.
Re: renderingCan you tell us more about your system?
What operating system are you using? 32-bit or 64-bit? How fast is your processor, how much RAM do you have and how much free, clean, defragmented space is on your main or C drive? Is your video project on your main or C hard drive or on a second or external drive? The problem you describe, with the program needing to re-render the timeline every time you re-open it, was a big problem in version 8 and 9 -- but was remedied in version 10. Something in your system's configuration -- or possibly your source video -- is confounding it. So the more details you can tell us about your system and your project's set-up, the more likely we'll be able to figure out what it is. (Also, of course, ensure you have the latest version of Quicktime, a necessary component in the program's work.) HP Envy with 2.9/4.4 ghz i7-10700 and 16 gig of RAM running Windows 11 Pro
Re: rendering(2)My system is an IMAC os 10.7.3 Lion. 4GB ram, PRE 10 installed on C drive. Project video on C drive. 45 GB free on drive. Source video: Cannon GL-2 SD camera. footage transferred camera to HD. As for the fact some of my clips generated a stabilization note which I said yes too, could that be a factor. My footage has no discernible video or sound issues. I realize that I don't have a large amount of free space on my drive and things do run very slowly, what with a 74 minute video. I do plan to get a designated 3TB 3.0, eSata, fire wire HD for my editing when this project is put to rest.
Re: renderingSorry, Director. I don't see anything in your specs that would lead to a problem. (You're a bit tight on free space, but you've certainly got enough.)
I edit on a very similar machine and never have a problem with the program remembering rendered video. HP Envy with 2.9/4.4 ghz i7-10700 and 16 gig of RAM running Windows 11 Pro
Re: renderingAlthough I'm using a PC, I came across this problem too. Here is a link to a previous topic, where we discussed the issue and RJ posted a possible solution.
A) i7-3930K 3.2GHz (3.8GHz Turbo), 32GB DDR3-1600, SSD 256GB, 2x1TB+2x2TB Seagate Barracuda (72krpm), Geforce GTX 550 Ti (1GB), Win10 Pro 64-bit
B) Sony Vaio i7-3632QM,12gb DDR3-1333MHz, GeForce® GT 640M LE (2GB), 750GB (7200rpm), Win10 Pro64-bit
Re: renderingI found that any clips that have the Stabilizer effect on them will lose any rendered previews the next time you open the project. There's no workaround for that except to buy the Prodad Mercalli Stabilizer plug-in.
Dell XPS 8940 Intel 8-core 10th gen.-i7 10700K (3.8-5.1 GHz); 32GB DDR4 2933 MHz RAM; 512 GB SSD; 2 TB 7200 HD; BDRE-drive; NVIDIA(R) Geforce(R) RTX 2060 SUPER(TM) 8G8 GDDR6
6 posts
• Page 1 of 1
Similar topics
trouble rendering and exporting in elements
Forum: Premiere Elements 2022 Author: snorgate Replies: 7
Some clips are flickering even after rendering
Forum: Premiere Elements 2021 Author: Fast Eddie Ski Replies: 3 Who is onlineUsers browsing this forum: No registered users and 17 guests |