|
Color Mgmt W7 designated default not sticking
7 posts
• Page 1 of 1
Color Mgmt W7 designated default not stickingI have calibrated my monitor and set the screen color mgmt to the new setting as default. Whenever I reboot or the computer goes into sleep mode it doesn't stay at the new setting. When I open a program like Bridge or PS it does go to the default. Or I have to go to color mgmt and select the setting as default which it already shows it is the default.
aka Cheryl
Intel i7 3770, Windows 7 Pro w/SP1, 64 bit, Intel 520 Series SSD, 32G RAM, 2 – 2T RAID, (1T external), GTX 550 Ti graphics
Re: Color Mgmt W7 designated default not stickingIn Color Management (from the start button type color management into the search box and press enter), there will be three tabs. Under the Devices Tab, Select your display for the device. Check the "use my settings for this device" box. It should list the profile you created in the profiles associated with this device. If it doesn't click "add..." and add it to the list. Set it as the default profile. I'm assuming you've already done that part.
Now the tricky part. Click on the "Advanced" tab. The Display Calibration section at the bottom has a check box labeled "Use Windows Display Calibration. That needs to be checked to enable the LUT loading, but it is grayed out so you can't check it. Click on the "Change System Defaults" button at the bottom of the panel. That will bring up the Color Management System Default panel which looks a lot like the regular Color Management panel. You only need to change one thing. Click on the "Advanced" tab in that panel. Now check the "Use Windows Display Calibration" box. You are done. You can close the Color management panels. Next time you boot into windows, the LUT will be automatically loaded from your profile.
Re: Color Mgmt W7 designated default not stickingThank you Bob! Did a reboot and it sticks! Your step by step took me less than 1 minute. I have some manuals that could use your rewriting.
aka Cheryl
Intel i7 3770, Windows 7 Pro w/SP1, 64 bit, Intel 520 Series SSD, 32G RAM, 2 – 2T RAID, (1T external), GTX 550 Ti graphics
Re: Color Mgmt W7 designated default not stickingRaise your hand if you think Bob is the smartest person on the planet!
Sidd "Life moves pretty fast. If you don't stop and look around once in a while, you could miss it." ..... Ferris Bueller
Re: Color Mgmt W7 designated default not stickingRegards,
-Ron Dell, Win10 Pro, Intel Core i7-6700 CPU @3.4GhHz, 8GB ram. 64-bit
Re: Color Mgmt W7 designated default not sticking
In the universe! Per his avatar. I have to add the most humble. Very much appreciated Bob! aka Cheryl
Intel i7 3770, Windows 7 Pro w/SP1, 64 bit, Intel 520 Series SSD, 32G RAM, 2 – 2T RAID, (1T external), GTX 550 Ti graphics
Re: Color Mgmt W7 designated default not sticking1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory.
2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
7 posts
• Page 1 of 1
Similar topics
change default project setting to custom
Forum: Premiere Elements 2021 Author: hpharley90 Replies: 2 Who is onlineUsers browsing this forum: No registered users and 36 guests |