|
25 fps or 50fps Load on CPU
19 posts
• Page 2 of 2 • 1, 2
Re: 25 fps or 50fps Load on CPUExcellent info Sidd
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory.
2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
Re: 25 fps or 50fps Load on CPUJust a further point of interest. I've noticed that my stuttering timeline etc is only like it when I have any of the 'menu' panels left open on the right hand side - ie transitions, text etc.
I'm sure it didn't happen in PRE 14 as I often used to leave a panel open ready for use. Is this something that has changed with PRE2018 ? John [1] Sony RX100 M6 (PAL)
[2] Panasonic HC-X920 (PAL) Software: Elements 2018 Sonicfire Pro 6.0 Intel i5 3.5 Ghz Gigabyte Z97X-UD3H C: 500Gb SSD, 2 x 1Tb internal SATA drives, 3 x 2Tb Back Up Drives 16 Gb Ram Radeon Pro WX3100 Based in Canterbury, UK
Re: 25 fps or 50fps Load on CPUSounds like a graphics issue with the user interface, strange that a few panels should cause an excess use of video memory. Can you tell if either the GPU or CPU memory is being eaten up if the panels are open versus closed?
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory.
2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
Re: 25 fps or 50fps Load on CPUThanks Chuck
I've had chance to check a few things. With any of the panels open and the timeline running the CPU is 'topping out much more than with panels closed. Even worse, if I run the timeline without rendering the CPU hits the top and stays there for the duration of the un-rendered section (perhaps this is normal? ). This happens even if I've only made a small change to the gamma setting (for instance) of a clip. Now that I'm aware of this, I can work ok, providing I remember to close all panels and render whenever I have made changes. My guess is that I'm running close to or at the limit of my CPU. Thanks again John [1] Sony RX100 M6 (PAL)
[2] Panasonic HC-X920 (PAL) Software: Elements 2018 Sonicfire Pro 6.0 Intel i5 3.5 Ghz Gigabyte Z97X-UD3H C: 500Gb SSD, 2 x 1Tb internal SATA drives, 3 x 2Tb Back Up Drives 16 Gb Ram Radeon Pro WX3100 Based in Canterbury, UK
19 posts
• Page 2 of 2 • 1, 2
Similar topicsWho is onlineUsers browsing this forum: No registered users and 31 guests |