They're here! More Muvipix.com Guides by Steve Grisetti!
The Muvipix.com Guides to Premiere & Photoshop Elements 2020
Not quite sure what our site has to offer?
Check out the
Muvipix Video Tour

removing a watermark from the bottom of Video

A discussion area specific to the Photoshop Pro versions.

removing a watermark from the bottom of Video

Postby Bubby Grub » Tue Nov 27, 2012 2:02 am

Hi All

Hope someone can help me, I am kind of very new to using video in CS6 Photoshop so please bear with me.
I have a video of about 7sec. and there is a mark on the bottom right hand side of the video.
Question how can I remove it, know how to do it on a pic but the frame by frame I am a little confused with.
This is just a small video of a roaring lion which I am using in a video for a friend's private use.

Any help greatly appreciated.

BG
When all else fails, Hug your Teddy.
User avatar
Bubby Grub
Premiere Member
Premiere Member
 
Posts: 380
Joined: Fri May 29, 2009 10:23 pm
Location: Queensland Australia

Re: removing a watermark from the bottom of Video

Postby Gerlinde » Tue Nov 27, 2012 2:15 am

Hi Bubby, I don't know if this would work. It is a free filter from Virtualdub:

Logoaway Krzysztof Wojdon
Created to remove logos from video sequence. Logo is a small sign usually put in one of the corners. Logos usually destroy quality of encoded video stream.

http://republika.pl/voidon/virtualdub/index.html
A) i7-3930K 3.2GHz (3.8GHz Turbo), 32GB DDR3-1600, SSD 256GB, 2x1TB+2x2TB Seagate Barracuda (72krpm), Geforce GTX 550 Ti (1GB), Win10 Pro 64-bit
B) Sony Vaio i7-3632QM,12gb DDR3-1333MHz, GeForce® GT 640M LE (2GB), 750GB (7200rpm), Win10 Pro64-bit
User avatar
Gerlinde
Moderator
Moderator
 
Posts: 1018
Joined: Fri Jun 22, 2007 3:45 pm
Location: San Diego,CA

Re: removing a watermark from the bottom of Video

Postby Bubby Grub » Tue Nov 27, 2012 2:56 am

Hi

Thanks so much for the quick response, I have just downloaded it, and at the moment it is not accepting the video file.
Unfortunately it is getting late here and I have to go do something else, but will have another look in the morning.
With a bit of luck maybe able to work something out.

Thanks again

Bubby Grub
When all else fails, Hug your Teddy.
User avatar
Bubby Grub
Premiere Member
Premiere Member
 
Posts: 380
Joined: Fri May 29, 2009 10:23 pm
Location: Queensland Australia

Re: removing a watermark from the bottom of Video

Postby RJ Johnston » Tue Nov 27, 2012 6:51 am

I've used an action to perform content aware fill on each frame. Sometimes it works and sometimes it doesn't.
Gateway DX4860-U28 i5-3300 Quad Core 3.0 GHz, Intel HD 2500 graphics, 8 Gb RAM; 1 TB 7200 RPM, 10 TB External, Windows 10 (x64).
User avatar
RJ Johnston
Premiere Member
Premiere Member
 
Posts: 3055
Joined: Thu Apr 12, 2007 4:33 pm
Location: Northern California, USA

Re: removing a watermark from the bottom of Video

Postby Bubby Grub » Tue Nov 27, 2012 4:29 pm

content aware fill

Hi
Yes that's what I originally tried in the first place, but the frames is the problem.
Thought it worked, but then found out it didn't.
Thanks for the thought

BG
When all else fails, Hug your Teddy.
User avatar
Bubby Grub
Premiere Member
Premiere Member
 
Posts: 380
Joined: Fri May 29, 2009 10:23 pm
Location: Queensland Australia

Re: removing a watermark from the bottom of Video

Postby Chuck Engels » Tue Nov 27, 2012 8:23 pm

Is there just one layer? If not be sure you are applying the fill to the correct layer ;)
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory.

2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
User avatar
Chuck Engels
Super Moderator
Super Moderator
 
Posts: 17686
Joined: Sun Feb 11, 2007 10:58 pm
Location: Atlanta, GA

Re: removing a watermark from the bottom of Video

Postby Bubby Grub » Tue Nov 27, 2012 11:17 pm

Hi All

Yes I can get the content aware fill to work perfectly removing the watermark, but frame by frame
is the problem. Kind of just wondered if I was missing something.
Thanks again
BG
When all else fails, Hug your Teddy.
User avatar
Bubby Grub
Premiere Member
Premiere Member
 
Posts: 380
Joined: Fri May 29, 2009 10:23 pm
Location: Queensland Australia

Re: removing a watermark from the bottom of Video

Postby John 'twosheds' McDonald » Wed Nov 28, 2012 2:49 am

I suspect that there is a reason why using the Motion effects (Effects>Motion: Position; Scale) in PrEl/PPro is not viable(?). Too much of the image lost(?).
i7 6700k, Z170-P mobo, Win10 64 bit, 32Gb RAM, Samsung 500GB NVME 970 Evo SSD x 2, LG BD Burner, Akasa card reader, Dell U2719D Monitor, Sony HVR-A1, Synology DS412+ 8TB NAS, Adobe CS6.
User avatar
John 'twosheds' McDonald
Moderator
Moderator
 
Posts: 3938
Joined: Mon Feb 19, 2007 11:57 am
Location: Carini, Sicily

Re: removing a watermark from the bottom of Video

Postby Bubby Grub » Wed Nov 28, 2012 3:11 am

Hi John

Yes in this case that idea worked out to be viable.

Trouble is with me when I come across something like this, I am the kind of girl, I hate things to beat me, and wanted to work it out the other way.
Just me. :-k
BG
When all else fails, Hug your Teddy.
User avatar
Bubby Grub
Premiere Member
Premiere Member
 
Posts: 380
Joined: Fri May 29, 2009 10:23 pm
Location: Queensland Australia

Re: removing a watermark from the bottom of Video

Postby Chuck Engels » Wed Nov 28, 2012 11:41 am

I think creating an action would save you time, could be applied to all frames rather quickly I would think.
What you are trying to do is similar to rotoscoping, lots of work.
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory.

2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
User avatar
Chuck Engels
Super Moderator
Super Moderator
 
Posts: 17686
Joined: Sun Feb 11, 2007 10:58 pm
Location: Atlanta, GA

Re: removing a watermark from the bottom of Video

Postby Paul LS » Wed Nov 28, 2012 12:05 pm

I normally use Virtualdub and the filter recommended by gpecht. I also have "removelogonow"

http://www.removelogo.com/remove-logo-from-video/

it was given away free on "Giveawayoftheday" a few months back. Does quite a good job but not as flexible as Virtualdub.
Paul LS
Super Contributor
Super Contributor
 
Posts: 3064
Joined: Sat Feb 10, 2007 11:21 am
Location: Southampton, UK

Re: removing a watermark from the bottom of Video

Postby Bubby Grub » Wed Nov 28, 2012 4:43 pm

Hi All

Thanks for all the help most appreciated.

BG
When all else fails, Hug your Teddy.
User avatar
Bubby Grub
Premiere Member
Premiere Member
 
Posts: 380
Joined: Fri May 29, 2009 10:23 pm
Location: Queensland Australia


Return to Photoshop 


Similar topics


Who is online

Users browsing this forum: No registered users and 1 guest