They're here! More Muvipix.com Guides by Steve Grisetti!
The Muvipix.com Guides to Premiere & Photoshop Elements 2020
As well as The Muvipix.com Guide to Vegas Movie Studio Platinum 17
Because there are stories to tell
muvipix.com

Project setting wrong fps

Specific to Premiere Elements version 2018

Project setting wrong fps

Postby John Walker » Sun Dec 22, 2019 5:12 pm

Hi all,

I've just completed a project that was recorded at 25fps. After saving as an ISO file and burning a disc, I noticed the quality wasn't my usual standard.

On checking, for some reason, the project setting is at 30fps. Usually the first clip sets the correct fps for the project.

So - any suggestions on what I can do to resolve the issue - without starting from scratch of course.

Cheers

John
[1] Sony RX100 M6 (PAL)
[2] Panasonic HC-X920 (PAL)
Software:
Elements 2018
Sonicfire Pro 6.0
Intel i5 3.5 Ghz
Gigabyte Z97X-UD3H
C: 500Gb SSD, 2 x 1Tb internal SATA drives, 3 x 2Tb Back Up Drives
16 Gb Ram
Radeon Pro WX3100
Based in Canterbury, UK
User avatar
John Walker
Frequent Contributor
Frequent Contributor
 
Posts: 155
Joined: Tue Oct 06, 2015 1:38 pm

Re: Project setting wrong fps

Postby sidd finch » Sun Dec 22, 2019 6:39 pm

You might try using Handbrake to see if you can resolve the fps issue.

Sidd
Vivere memento. – 'Remember to live..'
User avatar
sidd finch
Moderator
Moderator
 
Posts: 5030
Joined: Mon Apr 23, 2007 5:20 pm
Location: Cyberspace

Re: Project setting wrong fps

Postby Steve Grisetti » Sun Dec 22, 2019 7:59 pm

Both of the camcorders listed in your profile are NTSC AVCHD cams. Where did your 25 fps video come from?

Are you on the American or European TV standard?
3.6 ghz i7-7700 running Windows 10 Pro 64-bit with 16 gigs RAM and a 2 terrabyte HD. Also iMac 2.6 ghz dual-core, 4 gigs of RAM, running OSX El Capitan and Boot Camp Windows 10 64-bit.
User avatar
Steve Grisetti
Super Moderator
Super Moderator
 
Posts: 13537
Joined: Sat Feb 17, 2007 5:11 pm
Location: Milwaukee, Wisconsin

Re: Project setting wrong fps

Postby John Walker » Thu Dec 26, 2019 8:45 am

Hi Steve

Seasons Greetings to you.

I am on UK PAL with my cameras. The footage came from my Sony RX100 M6 set at 25fps.

Regards
John
[1] Sony RX100 M6 (PAL)
[2] Panasonic HC-X920 (PAL)
Software:
Elements 2018
Sonicfire Pro 6.0
Intel i5 3.5 Ghz
Gigabyte Z97X-UD3H
C: 500Gb SSD, 2 x 1Tb internal SATA drives, 3 x 2Tb Back Up Drives
16 Gb Ram
Radeon Pro WX3100
Based in Canterbury, UK
User avatar
John Walker
Frequent Contributor
Frequent Contributor
 
Posts: 155
Joined: Tue Oct 06, 2015 1:38 pm

Re: Project setting wrong fps

Postby Steve Grisetti » Fri Dec 27, 2019 7:55 am

Did you select UK as your country when you installed the program?

If you select the option to start a new project, which settings does it default to?
3.6 ghz i7-7700 running Windows 10 Pro 64-bit with 16 gigs RAM and a 2 terrabyte HD. Also iMac 2.6 ghz dual-core, 4 gigs of RAM, running OSX El Capitan and Boot Camp Windows 10 64-bit.
User avatar
Steve Grisetti
Super Moderator
Super Moderator
 
Posts: 13537
Joined: Sat Feb 17, 2007 5:11 pm
Location: Milwaukee, Wisconsin


Return to PRE version 2018 


Similar topics


Who is online

Users browsing this forum: No registered users and 2 guests