Specific to Premiere Elements Version 9.
by AllieB » Fri May 13, 2011 8:55 am
I am using PRE9 with all updates in the Dutch version. One would expect that there shouln´t be a difference between the USA-versioen and the Dutch version but I have a problem. When I use the gradient wipe transitions can one, according to the some tutorials, after chosing an image use a softeness glider. In my Dutch version there is no such a thing. I made a screenshot from the relevant part of my screen. Do I have some settings wrong or didn´t I installed something in the past. It is the first time I use this tool so I don´t know if it was present earlier. Can someone help me out because I need this now. Thanks a lot, AllieB Gradient wipe.JPG
You do not have the required permissions to view the files attached to this post. AllieB Greetings from Portugal
-
AllieB
- Registered User
-
- Posts: 77
- Joined: Fri May 21, 2010 7:44 am
- Location: Patroves, in the south of Portugal but born in the Netherlands
by momoffduty » Fri May 13, 2011 9:40 am
When you apply the gradient wipe transition a panel will pop up and ask to choose a gradient from your hard drive. After you select the jpg file gradient, the panel will have a slider to adjust the softness.
If yours doesn't work this way an option would be to make your gradient jpg file softer in photoshop before using.
aka Cheryl Intel i7 3770, Windows 7 Pro w/SP1, 64 bit, Intel 520 Series SSD, 32G RAM, 2 – 2T RAID, (1T external), GTX 550 Ti graphics
-
momoffduty
- Moderator
-
- Posts: 7603
- Joined: Thu Feb 22, 2007 10:43 am
- Location: near St. Louis
by Chuck Engels » Fri May 13, 2011 10:03 am
If you need some gradient wipes we have a set of free ones you can download http://muvipix.com/products.php?searchp ... =0&btn.y=0
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory. 2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
by AllieB » Fri May 13, 2011 11:03 am
Thanks for helping so far.
I downloaded the free stuff also that part would be o.k.
When, as you can see in my earlier screenshot, chose gradient wipe one can indeed choose a file but than no slider pops up. Typing this I remember that the one I placed in the transition came from a psd-file. Perhaps makes that the difference. I will test and report back.
Again thanks for your help,
Allieb.
AllieB Greetings from Portugal
-
AllieB
- Registered User
-
- Posts: 77
- Joined: Fri May 21, 2010 7:44 am
- Location: Patroves, in the south of Portugal but born in the Netherlands
by Bob » Fri May 13, 2011 11:34 am
Could someone with PrE9 test out the gradient wipe transition? There should have been a slider on that panel regardless of whether you took the default gradient or selected your own. Could this be another PrE 9 bug?
-
Bob
- Moderator
-
- Posts: 5925
- Joined: Wed Feb 21, 2007 4:49 am
- Location: Southern California, USA
by Chuck Engels » Fri May 13, 2011 12:06 pm
Testing now, will get back to you in a minute or two.
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory. 2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
by Chuck Engels » Fri May 13, 2011 12:10 pm
I have a slider in version 9.
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory. 2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
by Dave McElderry » Fri May 13, 2011 12:18 pm
I seem to have it on both - default and custom: GW 1.jpg GW 2.jpg
You do not have the required permissions to view the files attached to this post. Be yourself; everyone else is taken.
Asus X570-E motherboard; AMD Ryzen 9 3900X 3.8 GHz; 64GB DDR4; GeForce RTX 2060 6GB; 1TB Samsung 970 Pro M.2 SSD
-
Dave McElderry
- Moderator
-
- Posts: 4758
- Joined: Fri Feb 23, 2007 10:18 am
- Location: Lost In Middle America
by Bob » Fri May 13, 2011 12:58 pm
Chuck and Dave, thanks for checking.
Here are a few things to try.
1) Try holding down the shift key as you start up Premiere Elements. The plugins are cached to speed up startup. Holding shift during startup forces the plugin cache to be cleared and the plugins will reinitialize.
2) Try recreating the preferences file. Press and hold ctrl and shift immediately upon starting Premiere Elements should recreate the preferences file. Timing is a little fussy.
3) Try using gradient wipe in a new project. Sometimes the project file gets corrupted and causes bizarre problems.
-
Bob
- Moderator
-
- Posts: 5925
- Joined: Wed Feb 21, 2007 4:49 am
- Location: Southern California, USA
by AllieB » Fri May 13, 2011 3:36 pm
I am very sorry due to my lack of fluent English I looked after the wrong transition. In Dutch you should chose "Sluiter met verloop" (Shuttle with transition). In that case it works as described in the manual.
I apologize for the confusion I made.
Thanks to everybody,
AllieB
AllieB Greetings from Portugal
-
AllieB
- Registered User
-
- Posts: 77
- Joined: Fri May 21, 2010 7:44 am
- Location: Patroves, in the south of Portugal but born in the Netherlands
by Chuck Engels » Fri May 13, 2011 4:46 pm
Happy that you have found the solution Allie
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory. 2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
Return to PRE Version 9
Similar topics
Who is online
Users browsing this forum: No registered users and 5 guests
|