MiniDV, DVD, Hard Drive, 8 mm, High Def, brands, import / capture techniques, settings ... talk about camcorders in here.
by peggig » Mon Mar 01, 2010 10:06 pm
This may be the wrong forum for this, but I was wondering if anybody has any recommendations for putting together a simple inexpensive light kit.
Ideally, I'd like to have three lights (a key light, a fill light, and a backlight) that I can use for both indoor video shoots and portrait photography. (I could get by with just two to begin with.)
They need to be lightweight, adjustable, easy to set up, with low enough power consumption that I can plug in all three on a household circuit and not flip the circuit breaker.
Can anybody recommend either an inexpensive light kit or decent quality, inexpensive stands, lights, etc. that I can assemble myself?
Thanks in advance for any suggestions/recommendations.
-
peggig
- Frequent Contributor
-
- Posts: 186
- Joined: Mon Aug 31, 2009 2:20 pm
by Chuck Engels » Mon Mar 01, 2010 11:10 pm
B&H is a good place to look around and see what is available. http://www.bhphotovideo.com/c/browse/Li ... 4294551176Tungsten is good but expensive, Florescent is not the best but more reasonable in price. LED is great if you can afford it, and HMI is the ultimate but prices are extremely high. They offer many kits at a wide variety of prices.
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory. 2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
by peggig » Tue Mar 02, 2010 2:16 am
Everything they have is way out of my price range. I was wondering if anybody had any ideas on makeshift alternatives...
-
peggig
- Frequent Contributor
-
- Posts: 186
- Joined: Mon Aug 31, 2009 2:20 pm
by Steve Grisetti » Tue Mar 02, 2010 8:28 am
For a quick-and-dirty light set, you may want to check out Home Depot or another major hardware store. You can get halogen work lights and basic floodlights for $25-50 each. They usually come with tripods.
You can also find clip-on 100-200 watt floodlights for under $20.
They're hot as the dickens, unfortunately. And you may have to bounce them off a sheet of white cardboard to soften them. But they put out good, bright white light.
HP Envy with 2.9/4.4 ghz i7-10700 and 16 gig of RAM running Windows 11 Pro
-
Steve Grisetti
- Super Moderator
-
- Posts: 14447
- Joined: Sat Feb 17, 2007 5:11 pm
- Location: Milwaukee, Wisconsin
by Chuck Engels » Tue Mar 02, 2010 9:15 am
Just be careful, especially of halogen as they have a very yellow tint. Florescent will cast a blue tint that can sometimes look pretty bad if not used properly. What kind of price range are you thinking of? Ritz/Wolf Camera has some small light kits for around $100. I just posted the link to B&H because they have it all and you could get some ideas. Here is one for $200 http://www.ritzcamera.com/product/302043575.htmeBay also has some really good deals http://shop.ebay.com/?_from=R40&_trksid ... CategoriesJust make sure that the person you deal with has a good rating, lots of transactions and good feedback.
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory. 2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
by Dave McElderry » Tue Mar 02, 2010 4:44 pm
Just be careful, especially of halogen as they have a very yellow tint. Florescent will cast a blue tint that can sometimes look pretty bad if not used properly.
Not to sidetrack you too much, but Chuck taught me the importance of using the camer's manual white balance control. Whatever you end up getting in the way of lighting, the WB can make the difference between poor video and good. (Thanks Chuck!)
Be yourself; everyone else is taken.
Asus X570-E motherboard; AMD Ryzen 9 3900X 3.8 GHz; 64GB DDR4; GeForce RTX 2060 6GB; 1TB Samsung 970 Pro M.2 SSD
-
Dave McElderry
- Moderator
-
- Posts: 4758
- Joined: Fri Feb 23, 2007 10:18 am
- Location: Lost In Middle America
by Chuck Engels » Thu Mar 04, 2010 8:36 pm
Here are some lights that we use at my church http://www.bhphotovideo.com/bnh/control ... decaSearchhttp://www.bhphotovideo.com/c/search?Nt ... Search=yesSome of the kits are not very expensive and the lights are pretty nice.
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory. 2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
by peggig » Fri Mar 05, 2010 11:42 pm
Thanks, Chuck. The Lowell kits are outside my price range. (I'm trying to keep it under $200.) However, the Wesrcott uLite kit looks like a good possibility. I prefer softboxes to umbrellas, and it also looks like the uLite will take either tungsten or daylight fuorescent bulbs.
The fluorescents are a lot more expensive, but they last a lot longer (if the don't break), and don't get as hot. I was thinking of starting out with the tungstens that come with the kit and maybe switching to fluorescents when they burn out.
I thought about getting floods from the hardware store, but I'm not sure if or how you could attach a softbox to them (or an umbrella). Do you know if thats possible?
Also, can you recommend a good protective case to carry the lights, stands, etc. in that will keep them from banging around, that would be under $50?
Thanks again!
-
peggig
- Frequent Contributor
-
- Posts: 186
- Joined: Mon Aug 31, 2009 2:20 pm
by Chuck Engels » Sat Mar 06, 2010 3:55 pm
I'm not sure how you would hook up a softbox or umbrella to the flood lights from the hardware store. Might find some DIY stuff online, I'll check around.
Somebody here just made a camera case out of Foam Rubber and a inexpensive tool box. You could do the same with the lights, just find a big plastic tool box that you can work with.
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory. 2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
by Chuck Engels » Sat Mar 06, 2010 4:01 pm
Here are some DIY Lighting Projects http://www.shuttertalk.com/articles/diylighting[youtube]http://www.youtube.com/watch?v=-zARqGgHjNc[/youtube] http://www.diylife.com/2008/01/10/perfe ... under-100/That should be enough to keep you busy for awhile
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory. 2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
by Steve Grisetti » Sat Mar 06, 2010 6:06 pm
Very, very nice DIY project, Chuck!
HP Envy with 2.9/4.4 ghz i7-10700 and 16 gig of RAM running Windows 11 Pro
-
Steve Grisetti
- Super Moderator
-
- Posts: 14447
- Joined: Sat Feb 17, 2007 5:11 pm
- Location: Milwaukee, Wisconsin
by FranciscoRogers » Thu Aug 29, 2013 2:36 am
peggig wrote:This may be the wrong forum for this, but I was wondering if anybody has any recommendations for putting together a simple inexpensive light kit.
Ideally, I'd like to have three lights (a key light, a fill light, and a backlight) that I can use for both indoor video shoots and portrait photography. (I could get by with just two to begin with.)
They need to be lightweight, adjustable, easy to set up, with low enough power consumption that I can plug in all three on a household circuit and not flip the circuit breaker.
Can anybody recommend either an inexpensive light kit or decent quality, inexpensive stands, lights, etc. that I can assemble myself?
Thanks in advance for any suggestions/recommendations.
hello friend I know thread is old but which lights have you used? Even I need similar light specifications so please help me with some suitable options..Looking forward for quick reply... Thanks:)
-
FranciscoRogers
- New User
-
- Posts: 1
- Joined: Wed Aug 28, 2013 6:13 am
by Chuck Engels » Thu Aug 29, 2013 4:25 pm
Hi Francisco, I recommend starting a new topic and give us a little detail about what you are doing and what type of situations you need the lighting for.
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory. 2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
Return to Camcorders
Similar topics
Who is online
Users browsing this forum: No registered users and 3 guests
|