If I want wish to add an HDV (1440x1080) clip to the end of the slide show, what is the correct preset for the overall project, 1920x1080 or 1440x1080?
Thank you .
![d'oh! #-o](./images/smilies/eusa_doh.gif)
|
Help! HD Project Preset When Combining HDV Video and Stills?
5 posts
• Page 1 of 1
Help! HD Project Preset When Combining HDV Video and Stills?Most of my work consists of creating slide shows using 2288x1520 stills on a 1920x1080 project-preset timeline.
If I want wish to add an HDV (1440x1080) clip to the end of the slide show, what is the correct preset for the overall project, 1920x1080 or 1440x1080? Thank you . ![]() HP h8-1360t Win7 Home Premium 64-bit/Intel i7-3770@3.40GHz/8GB RAM/NVIDIA GeForce GTX 1050/LG BH10LS30 Blu-ray RW+SD DVD/CD RW+LightScribe/52" Samsung LCD HDTV (ancient 1080p)/PRE & PSE & ORGANIZER 2018/CS 5.1 & 5.5 (rare use)
![]()
Re: Help! HD Project Preset When Combining HDV Video and Stills?I always use the HDV 1080i 30 preset George. That is 1440 x 1080
1. Thinkpad W530 Laptop, Core i7-3820QM Processor 8M Cache 3.70 GHz, 16 GB DDR3, NVIDIA Quadro K1000M 2GB Memory.
2. Cybertron PC - Liquid Cooled AMD FX6300, 6 cores, 3.50ghz - 32GB DDR3 - MSI GeForce GTX 960 Gaming 4G, 4GB Video Ram, 1024 Cuda Cores.
Re: Help! HD Project Preset When Combining HDV Video and Stills?
Thank you, sir. HP h8-1360t Win7 Home Premium 64-bit/Intel i7-3770@3.40GHz/8GB RAM/NVIDIA GeForce GTX 1050/LG BH10LS30 Blu-ray RW+SD DVD/CD RW+LightScribe/52" Samsung LCD HDTV (ancient 1080p)/PRE & PSE & ORGANIZER 2018/CS 5.1 & 5.5 (rare use)
![]()
Re: Help! HD Project Preset When Combining HDV Video and Stills?
I wouldn't phrase it that way, George. Neither one is more correct than the other. And, either way, you'll get something that looks good. There are differences though. Both will have the correct field order for the video and both will fill a 1080p TV (The 1440 will have a rectangular pixel aspect ratio of 1.333 while the 1920 will have a square pixel aspect ratio of 1.0). However, the 1920 will have a higher horizontal resolution than the 1440 since it will have 480 more pixels (that's 33.3% more than 1440). Using 1920 won't increase the resolution of the HDV footage, it is what it is, but it will allow for more horizontal detail in your still images. On the other hand, It is theoretically possible that resampling the video from 1440 to 1920 could soften the HDV image very slightly. Like everything in life, it's a trade off. Since you are dealing primarily with a slide show, you may want to use the 1920 preset and go for the higher horizontal resolution. Especially if the amount of HDV footage is small in comparison. If you have mainly HDV footage with some stills thrown in, it may be better to use the 1440. It's your call. ![]()
Re: Help! HD Project Preset When Combining HDV Video and Stills?
Thanks for weighing in, Bob. For this project, I tried some things I had not done before: --whereas in the past I would create the Album for my slide shows with edited PSDs, this time I created an Album consisting of 99 JPEGS that were made with my HV30 in Still mode (all 1920x1080) --of those that needed editing (usually just "dust spotting"=pixel removal) I saved over the originals with the edited JPEGs (high-quality) --after adding the 99 stills to the PRE7 Timeline (Project Preset 1920x1080), I added the 8 minutes of HDV footage at the end --amazingly, PRE7 never even blinked or coughed = did not crash even once despite the onslaught I am very satisified with the output. If ever I do a project that consists mostly of video but with a few added stills, then I intend to do what Chuck does and what you suggested, that is, use the 1440 x 1080 Project Preset. Thanks again for the input. HP h8-1360t Win7 Home Premium 64-bit/Intel i7-3770@3.40GHz/8GB RAM/NVIDIA GeForce GTX 1050/LG BH10LS30 Blu-ray RW+SD DVD/CD RW+LightScribe/52" Samsung LCD HDTV (ancient 1080p)/PRE & PSE & ORGANIZER 2018/CS 5.1 & 5.5 (rare use)
![]()
5 posts
• Page 1 of 1
Similar topics
How to set up a project when using multiple file types
Forum: Premiere Elements 2022 Author: HammerKing Replies: 7 Who is onlineUsers browsing this forum: No registered users and 1 guest |