Specific to Premiere Elements Version 8.
5 posts • Page 1 of 1
I am presently working with material which was shot on Regular 8 black and white film and professionally digitized in a lab which services most of the major TV stations and film studios in town (not cheap, but good). As expected, the DVDs I got back from the lab are quite grainy. I can improve the appearance of the clips by manipulating contrast, brightness and several other adjustments, but having to do that individually for a large number of clips is very frustrating. Although I have always avoided using the automated corrections available in PRE8 preferring to make my own adjustments, in this case I am willing to give it a try.
Are there any settings available which would automatically generally improve the appearance of these clips?
2.40 gigahertz Intel Core2 Quad Q6600; Windows 10 PRO 32 bit; 3GB RAM; Graphics ATI Radeon HD3800 Series; 2 ViewSonic VP2365 Monitors; 2 int. HDs: 1TB ("C "), 750 GB; 3 ext. HDs: 2x2TB and 1x3TB; Camera Panasonic PV-DV953D; Sound Files .wav.
One you have the desired effects placed on a clip you can always do a copy and paste attributes to your remaining clips. If you highlight all the remaining clips you can "paste attributes" all at once.
Also have you tried sharpness. This works best in small increments.
What you are doing does not matter so much as what you are learning from doing it. Ancient Egyptian Proverb
Just don't expect too much. 8mm was pretty low quality film, and the cameras were usually fixed focus.
Grainy and blotchy (and probably scratchy) is just going to be the nature of the beast, unfortunately.
3.4 ghz i7-4770 running Windows 10 64-bit with 12 gigs RAM; three internal 500 gig SATA drives. Also iMac 2.6 ghz dual-core, 4 gigs of RAM, running OSX El Capitan and Boot Camp Windows 10 64-bit.
In the past, I have used Neat Video for Premiere, http://www.neatvideo.com/, to remove grain and noise. It's not cheap. The pro version is US $99.00. This requires practice and study in order to use it effectively. It's easy to overdo it and lose the detail.
Premiere Elements has an Antialias effect that might help. Afterwards you would probably have to use the Sharpen effect. This seems to work better on HD than SD, where it doesn't seem to work at all.
If you have New Blue Video Essentials 2, there is a Noise Reducer effect you could try. Nowadays, you would have to buy NewBlue Essentials 3 Ultimate for $399 in order to get the Noise reducer plugin. https://www.newbluefx.com/essentials-3-ultimate.
Sometimes the digitized 8mm film will look better when played on TV without grain corrections.
Gateway DX4860-U28 i5-3300 Quad Core 3.0 GHz, Intel HD 2500 graphics, 8 Gb RAM; 1 TB 7200 RPM, 10 TB External, Windows 10 (x64).
I've found that Neat Video works especially well for black and white.
5 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest