Feedback, problems or suggestions related to our entire website.
by nkummer » Mon Feb 19, 2007 12:54 pm
Hi,
I think this is the correct area to post this, but if not, just let me know.
For the DVD templates, I noticed that the video for "Vacation DVD Template - NTSC" does not show. The audio comes out fine. The other templates also work fine.
Question 2, you have three version, NTSC, PAL, and Version 3. I understand the first 2, what does "version 3" mean? For PE3? If so you may want to be more explicit, especially once 4, 5 & 6 come out. :D
So far a great site.
Thanks,
Norm
-
nkummer
- Premiere Member
-
- Posts: 63
- Joined: Mon Feb 19, 2007 11:59 am
- Location: Ottawa, Canada
by Ron » Mon Feb 19, 2007 1:22 pm
nkummer wrote:Hi, I think this is the correct area to post this, but if not, just let me know.
Probably more appropriate in the muvipix suggestions, thanks. nkummer wrote:For the DVD templates, I noticed that the video for "Vacation DVD Template - NTSC" does not show. The audio comes out fine. The other templates also work fine.
Can you be more specific, Norm? Is the preview not working or the AVI file itself once downloaded? nkummer wrote:Question 2, you have three version, NTSC, PAL, and Version 3. I understand the first 2, what does "version 3" mean? For PE3? If so you may want to be more explicit, especially once 4, 5 & 6 come out. :D
Good point. I will correct that, thanks !
-
Ron
- Site Admin
-
- Posts: 3219
- Joined: Sat Oct 21, 2006 8:57 am
- Location: Maine, USA
-
by nkummer » Mon Feb 19, 2007 1:50 pm
Probably more appropriate in the muvipix suggestions, thanks.
Ok. That was my next choice. :D Can you be more specific, Norm? Is the preview not working or the AVI file itself once downloaded?
The window pops up, I can see the green "loading" bar move along, then "Done", and then the sound plays, but there is no picture. All the other templates work fine, including the other Vacation ones.
Regards,
Norm
-
nkummer
- Premiere Member
-
- Posts: 63
- Joined: Mon Feb 19, 2007 11:59 am
- Location: Ottawa, Canada
by Ron » Mon Feb 19, 2007 2:20 pm
Try it again Norm
Thanks for the keen eye !
Regards, -Ron
Dell, Win10 Pro, Intel Core i7-6700 CPU @3.4GhHz, 8GB ram. 64-bit
-
Ron
- Site Admin
-
- Posts: 3219
- Joined: Sat Oct 21, 2006 8:57 am
- Location: Maine, USA
-
by nkummer » Mon Feb 19, 2007 2:27 pm
You're welcome.
It works now.
(of course I only stumbled across it since I am looking for a template for my vacation, and I live in NA)
Norm
-
nkummer
- Premiere Member
-
- Posts: 63
- Joined: Mon Feb 19, 2007 11:59 am
- Location: Ottawa, Canada
by nkummer » Mon Feb 19, 2007 2:34 pm
Ron,
Ok, I am going to follow up my own post . It does work (or at least all three are consistent), but I noticed that the Vacation template is different from the other templates.
All I see is the jet going across the page. There is no text. On the other templates I see the Main Menu text and then after a few seconds I see the Scene Menu. I don?t see any of this with the Vacation template.
Is this normal?
Regards,
Norm
-
nkummer
- Premiere Member
-
- Posts: 63
- Joined: Mon Feb 19, 2007 11:59 am
- Location: Ottawa, Canada
by Chuck Engels » Mon Feb 19, 2007 2:56 pm
I have text on mine, must be a font issue. We may need to bring Steve in on this.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
by Ron » Mon Feb 19, 2007 3:04 pm
The preview of the Vacation Template doesn't have text.
Regards, -Ron
Dell, Win10 Pro, Intel Core i7-6700 CPU @3.4GhHz, 8GB ram. 64-bit
-
Ron
- Site Admin
-
- Posts: 3219
- Joined: Sat Oct 21, 2006 8:57 am
- Location: Maine, USA
-
by Chuck Engels » Mon Feb 19, 2007 3:56 pm
But the actual template is suppose to have text.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
by nkummer » Mon Feb 19, 2007 7:32 pm
Ron, Chuck,
I'll let the two of you sort it out. For me I'll almost for sure join before noon tomorrow so I can just download it and look at the final copy, but not so sure I'd pay $5 with seeing the text.
Just some feedback, so far the site looks great. I'll be looking for more "Vacation" templates as almost all my videos are from vacations my wife and I took.
Thanks for the great work.
Norm
-
nkummer
- Premiere Member
-
- Posts: 63
- Joined: Mon Feb 19, 2007 11:59 am
- Location: Ottawa, Canada
by Chuck Engels » Mon Feb 19, 2007 8:00 pm
Hi Norm, Be sure to vote on the templates you want, there is a box on the home page to add your comments on what you would like to see more of.
-
Chuck Engels
- Super Moderator
-
- Posts: 18155
- Joined: Sun Feb 11, 2007 10:58 pm
- Location: Atlanta, GA
-
by Ric » Thu May 31, 2007 1:51 pm
I just downloaded some new DVD template and want to install them into PE3. I know I have seen a discussion somewhere here with installing the template but now can't find it. Can someone help?
-
Ric
- Premiere Member
-
- Posts: 264
- Joined: Mon Feb 19, 2007 11:42 pm
- Location: Manchester, MO.
by Steve Grisetti » Thu May 31, 2007 1:55 pm
Just extract the two files (Make sure you've downloaded the right version and the right format!) to a new folder you've created in the Custom folder in (and I'm going from memory so cut me a break) C:/PROGRAM FILES/ADOBE/PREMIERE ELEMENTS 3.0/DVD TEMPLATES/CUSTOM. (In version 2, I think, before you get to DVD TEMPLATES, you have to go into a us_eng folder or somesuch.)
Once they're in there, just open your program and go to the DVD workspace. They should show up as one of the Custom templates.
HP Envy with 2.9/4.4 ghz i7-10700 and 16 gig of RAM running Windows 11 Pro
-
Steve Grisetti
- Super Moderator
-
- Posts: 14447
- Joined: Sat Feb 17, 2007 5:11 pm
- Location: Milwaukee, Wisconsin
by Ric » Thu May 31, 2007 10:14 pm
I downloaded 2 DVD templates the Baseball and Dancing. My question is I'm using version 3 and when I download the version and got ready to install them they were in the pal format I thought being in the US I needed ntsc format is that correct.
-
Ric
- Premiere Member
-
- Posts: 264
- Joined: Mon Feb 19, 2007 11:42 pm
- Location: Manchester, MO.
by Bob » Thu May 31, 2007 11:25 pm
Ric wrote:My question is I'm using version 3 and when I download the version and got ready to install them they were in the pal format I thought being in the US I needed ntsc format is that correct.
While prior versions of Premiere Elements used separate DVD templates for PAL and NTSC, version 3 does not. The DVD templates for version 3 use PAL. Don't worry, Premiere Elements 3 will output them as NTSC or PAL depending on the project preset you've chosen.
-
Bob
- Moderator
-
- Posts: 5925
- Joined: Wed Feb 21, 2007 4:49 am
- Location: Southern California, USA
Return to muvipix.com Suggestions
Similar topics
Who is online
Users browsing this forum: No registered users and 3 guests
|